Hydraulic Press. The practical significance of Pascal's law Examples of problems with solutions

Grade 7 Lesson #41 Date

Subject: Pascal's law. Hydraulic Press.

Lesson type: Lesson learning new material.

Goals and objectives of the lesson:

· Educational goal - learn about Pascal's Law , expand and deepen students' knowledge on the topic “Pressure”, discuss the difference between solids, liquids and gases; introduce a new concept of "Hydraulic press", help students to comprehend the practical significance, usefulness of the acquired knowledge and skills.

· Development goal - create conditions for the development of research and creative skills; communication and collaboration skills.

· educational goal - promote the instillation of a culture of mental work, create conditions for increasing interest in the material being studied.

Equipment:

Presentation, videos

cards with individual tasks

During the classes.

1.Org. moment.

Preparing students for class work. Reception "Smile"

2. Motivation and setting goals and objectives of the lesson.

Picture slide show. The objectives of our lesson are:

Today in the lesson we will study one of the most important laws of nature, Pascal's law. The purpose of our lesson: to study the law, as well as to learn how to explain a number of physical phenomena using Pascal's law. See the application of the law in practice.

To study the physical basis of the device and work hydraulic machine;

Give the concept of a hydraulic press and show its practical application.

3. Study new topic

All bodies are made up of molecules and atoms. We have considered three different state of aggregation substances and based on the structure, they are different in properties. Today we have to get acquainted with the influence of pressure on solid, liquid and gaseous substances. Let's look at examples:

Drive a nail into the board with a hammer. What are we observing? In which direction is the pressure acting?

(Under the pressure of the hammer, the nail enters the board. In the direction of the force. The board and the nail are integral solids.)

Let's take the sand. This is a solid granular substance. Fill the tube with the piston with sand. One end of the tube is covered with a rubber film. We press on the piston and observe.

(Sand presses on the film walls not only in the direction of the force, but also to the sides.)

Now let's see how the liquid behaves. Fill the tube with liquid. We press on the piston, observe and compare with the results of previous experience.

(The film takes the form of a ball, the liquid particles press in different directions equally.)

Let's take gas as an example. Let's inflate the ball.

(Pressure is transmitted by air particles equally in all directions.)

We considered the effect of pressure on solid bulk, liquid and gaseous substances. What similarity do you notice?

(For liquids and gases, pressure acts in different directions in the same way, and this is a consequence of the random movement of a huge number of molecules. For solid bulk substances, pressure acts in the direction of the force and to the sides.)

Let us explain in more depth the process of pressure transfer by liquids and gases.

Imagine that a tube with a piston is filled with air (gas). The particles in the gas are evenly distributed throughout the volume. Let's hit the piston. The particles under the piston are compacted. Due to their mobility, the gas particles will move in all directions, as a result of which their arrangement will again become uniform, but more dense. Therefore, the gas pressure increases everywhere. This means that the pressure is transferred to all particles of the gas.

Let's do an experiment with Pascal's ball. Let us take a hollow ball, having narrow holes in various places, and attach it to a tube with a piston.

If you draw water into the tube and press on the piston, then water will flow from all the holes of the ball in the form of streams. (Children make their guesses.)

Let us formulate a general conclusion.

The piston presses on the surface of the water in the tube. The water particles under the piston, condensing, transfer its pressure to other layers lying deeper. Thus, the pressure of the piston is transmitted to each point of the liquid filling the ball. As a result, some of the water is pushed out of the ball in the form of streams flowing out of all holes.

The pressure exerted on a liquid or gas is transmitted without change to every point in the volume of the liquid or gas. This statement is called Pascal's law.

4. Consolidation: answer questions

1. If you shoot from a pneumatic gun at a hard-boiled egg, then the bullet will pierce only a through hole in it, while the rest remains intact. But if you shoot a raw egg, it will shatter. (When fired at a boiled egg, the bullet pierces a solid body, so it pierces in the direction of flight because pressure is transferred in that direction.)

2. Why is a projectile explosion under water destructive for organisms living in water? (The pressure of an explosion in a liquid, according to Pascal's law, is transmitted equally in all directions, and animals can die from this)

3. An evil genie located in gaseous state inside a corked bottle, exerts strong pressure on its walls, bottom and cork. How does a genie hit in all directions, if in a gaseous state it has neither arms nor legs? What law allows him to do this? (molecules, Pascal's law)

4. For astronauts, food is made in a semi-liquid form and placed in tubes with elastic walls. What helps astronauts squeeze food out of tubes?

(Pascal's law)

5. Try to explain the process of making glass vessels, when air is blown into a drop of molten glass?

(According to Pascal's law, the pressure inside the gas will be transferred equally in all directions, and liquid glass inflate like a balloon.)

Application of Pascal's law in practice

Motivation for studying this topic: "Hydraulic press"

You have probably observed the situation: a wheel is broken, the driver easily lifts the car with the help of a device and changes the damaged wheel, despite the fact that the weight of the car is about 1.5 tons.

Let's answer the question together why is this possible?

He uses a jack. The jack belongs to hydraulic machines.

Mechanisms that work with the help of some kind of liquid are called hydraulic (Greek "gidor" - water, liquid).

Hydraulic Press is a material forming machine driven by a squeezable liquid.

answer the questions.

v Are the cylinders and pistons the same? What is the difference?

v What does it mean: each piston does its own thing?

v On what law is the operation of a hydraulic press based?

The device of the hydraulic press is based on Pascal's law. Two communicating vessels are filled with a homogeneous liquid and closed by two pistons, the areas of which are S1 and S2 (S2 > S1). According to Pascal's law, we have equality of pressures in both cylinders: p1=p2.

p1=F1/S1, P2=F2/ S2 , F1/S1= F2/ S2, F1 S2=F2 S1

During the operation of the hydraulic press, a gain in force is created, equal to the ratio the area of the larger piston to the area of the smaller one.

F1/ F2 = S1/ S2.

The principle of operation of the hydraulic press.

The body to be pressed is placed on a platform connected to a large piston. With the help of a small piston, a large pressure is created on the liquid. This pressure is transmitted without change to each point of the liquid filling the cylinders. Therefore, the same pressure acts on the larger piston. But since its area is larger, then the force acting on it will be greater than the force acting on the small piston. Under the influence of this force, the larger piston will rise. When this piston is raised, the body rests against the fixed upper platform and is compressed. The pressure gauge, which measures the pressure of a liquid, is a safety valve that automatically opens when the pressure exceeds the allowable value. From a small cylinder to a large liquid is pumped by repeated movements of the small piston.

Hydraulic presses are used where a lot of power is required. For example, for squeezing oil from seeds at oil mills, for pressing plywood, cardboard, hay. In metallurgical plants, hydraulic presses are used in the manufacture of steel shafts for machines, railway wheels and many other products. Modern hydraulic presses can develop hundreds of millions of newtons of force.

Millions of cars are equipped with hydraulic brakes. Tens and hundreds of thousands of excavators, bulldozers, cranes, loaders, lifts are equipped with a hydraulic drive.

Hydraulic jacks and hydraulic presses are used in huge quantities for a variety of purposes - from pressing bandages onto wagon wheelsets to lifting drawbridge trusses to allow ships to pass on rivers.

Video demonstration

5. Checking Understanding: Answer the test questions.

	1 option	Option 2
	A) work B) pressure	A) Joule B) Pascal B) Newton


	A) reduce less; less B) reduce; more; more B) increase more; more D) increase; less; more	A) reduce more; less B) reduce; more; more B) reduce less; less D) increase; more; more
	C) the wheels are replaced with caterpillars	A) knife blades are sharpened D) knives are replaced with fishing line

	Point out the wrong statement.	B) at the bottom of the vessel D) in all directions
		A) 1300 kg/m3

7. Peer review: exchange notebooks and check

Option 1: 1c, 2b, 3a, 4d, 5d, 6d, 7d, 8a

Option 2: 1b, 2d, 3a, 4a, 5d, 6b, 7d, 8c

6. Summing up. Homework. ξ 44.45, compose comparison table: "Pressure solids, liquids and gases"

Answer test questions.

	1 option	Option 2
	What physical quantity determined by the formula p \u003d F / S? A) work B) pressure	Which of the following units is the basic unit for measuring pressure? A) Joule B) Pascal B) Newton
	Which of the following values can express pressure?	Express the pressure equal to 0.01 N/cm2 in Pa.
	What formula can be used to calculate the force of pressure?	What formula can be used to calculate pressure?
	List some of the words that are missing. Cutting tools are sharpened in order to ... pressure, because the more ... the area of \u200b\u200bsupport, the ... pressure. A) reduce less; less B) reduce; more; more B) increase more; more D) increase; less; more	List some of the words that are missing. The walls of buildings are installed on a wide foundation in order to ... pressure, because the more ... the area of \u200b\u200bthe support, the ... pressure. A) reduce more; less B) reduce; more; more B) reduce less; less D) increase; more; more
	Find the wrong answer. They try to reduce pressure in the following ways: A) increase the area of \u200b\u200bthe lower part of the foundation B) truck tires are made wider C) the wheels are replaced with caterpillars D) Reduce the number of columns supporting the platform	Find the wrong answer. They try to increase the pressure in the following ways A) knife blades are sharpened B) pliers are replaced with tongs C) they use a cart in summer, a sleigh in winter D) knives are replaced with fishing line
	A box weighing 0.96 kN has a support area of 0.2 m2. Calculate the pressure of the box.	A force of 2 N acts on the needle during sewing. Calculate the pressure exerted by the needle if the area of the point is 0.01 mm2.
	Point out the wrong statement. A) gas pressure is created by impacts of randomly moving molecules B) a gas exerts the same pressure in all directions C) if the mass and temperature of the gas remain unchanged, then with a decrease in the volume of the gas, the pressure increases D) if the mass and temperature of the gas remain unchanged, then with an increase in the volume of the gas, the pressure does not change	Pascal's Law states that liquids and gases transmit the pressure exerted on them... A) in the direction of the force B) at the bottom of the vessel B) in the direction of the resultant force D) in all directions
	A pressure of 4 kPa corresponds to a pressure of ..	Which of the following values can express hydrostatic pressure? A) 1300 kg/m3

Attention! The site administration site is not responsible for the content methodological developments, as well as for compliance with the development of the Federal State Educational Standard.

Participant: Maxim Kolesnikov
Head: Scherbinina Galina Gennadievna

Purpose of the work: experimental confirmation of Pascal's law.

Introduction

Pascal's law became known in 1663. It was this discovery that formed the basis for the creation of superpresses with a pressure of over 750,000 kPa, a hydraulic drive, which in turn led to the emergence of hydraulic automation that controls modern jet liners, spaceships, machine tools with numerical control, powerful dump trucks, mining combines, presses, excavators ... Thus, Pascal's law has found great application in modern world. However, all these mechanisms are quite complex and cumbersome, so I wanted to create devices based on Pascal's law, to see for myself and convince my classmates, many of whom believe that it is stupid to waste time on "ancient" when we are surrounded by modern devices that this topic is still interesting and relevant. In addition, do-it-yourself devices, as a rule, arouse interest, make you think, fantasize, and look at the discoveries of "deep antiquity" with different eyes.

object my research is Pascal's law.

Goal of the work: experimental confirmation of Pascal's law.

Hypothesis: knowledge of Pascal's law can be useful for the design of construction equipment.

Practical significance of the work: In my work, experiments are presented for demonstration in physics classes in the 7th grade of the secondary secondary school. The developed experiments can be demonstrated both in the lesson when studying phenomena (I hope that this will help form some concepts when studying physics), and as homework for students.

The proposed settings are universal, one setting can be used to show several experiments.

Chapter 1. All our dignity is in the ability to think

Blaise Pascal (1623-1662) - French mathematician, mechanic, physicist, writer and philosopher. A classic of French literature, one of the founders of mathematical analysis, probability theory and projective geometry, the creator of the first samples of counting technology, the author of the basic law of hydrostatics. Pascal entered the history of physics by establishing the basic law of hydrostatics, and confirmed Toricelli's assumption about the existence of atmospheric pressure. The SI unit of pressure is named after Pascal. Pascal's law states that the pressure exerted on a liquid or gas is transmitted to any point without change in all directions. Even the well-known law of Archimedes is a special case of Pascal's law.

Pascal's law can be explained using the properties of liquids and gases, namely: the molecules of a liquid and gas, hitting the walls of a vessel, create pressure. The pressure increases (decreases) as the concentration of molecules increases (decreases).

There is a widespread problem with which one can understand the operation of Pascal's law: when a rifle is fired, a hole is formed in a boiled egg, since the pressure in this egg is transmitted only in the direction of its movement. A raw egg shatters because the pressure of a bullet in a liquid, according to Pascal's law, is transmitted equally in all directions.

By the way, it is known that Pascal himself, using the law discovered by him, invented a syringe and a hydraulic press in the course of the experiments.

The practical significance of Pascal's law

The work of many mechanisms is based on Pascal's law, in a different way, such gas properties as compressibility and the ability to transfer pressure in all directions equally, have found wide application in the design of various technical devices.

So, compressed air is used in a submarine to lift it from a depth. When diving, special tanks inside the submarine are filled with water. The mass of the boat increases and it sinks. To lift the boat, compressed air is pumped into these tanks, which displaces the water. The mass of the boat decreases and it floats.

Fig.1. Submarines on the surface: main ballast tanks (TsGB) are not filled

Fig.2. Submarine in a submerged position: the CGB was filled with water

Devices that use compressed air are called pneumatic. These include, for example, a jackhammer, with which asphalt is opened, frozen soil is loosened, and rocks are crushed. Under the action of compressed air, the peak of the jackhammer makes 1000-1500 blows per minute of great destructive power.

In the production for forging and processing of metals, a pneumatic hammer and a pneumatic press are used.

In trucks and railway transport air brake is used. In subway cars, doors are opened and closed using compressed air. The use of air systems in transport is due to the fact that even in the event of air leakage from the system, it will be replenished due to the operation of the compressor and the system will work properly.
The work of the excavator is also based on Pascal's law, where hydraulic cylinders are used to set in motion its arrows and bucket.

Chapter 2. The soul of science is the practical application of its discoveries

Experience 1 (video, method of modeling the principle of operation of this device at the presentation)

The operation of Pascal's law can be traced to the work of a laboratory hydraulic press, consisting of two interconnected left and right cylinders, uniformly filled with liquid (water). The plugs (weights) indicating the liquid level in these cylinders are highlighted in black.

Rice. 3 Diagram of a hydraulic press

Rice. 4. Application of hydraulic press

What happened here? We pressed down on the plug in the left cylinder, which forced the liquid out of this cylinder towards the right cylinder, as a result of which the plug in the right cylinder, experiencing fluid pressure from below, rose. Thus, the fluid has transferred pressure.

I conducted the same experiment only in a slightly different form at my home: a demonstration of an experiment with two cylinders connected to each other - medical syringes connected to each other and filled with liquid-water.

The device and principle of operation of the hydraulic press is described in the 7th grade textbook for secondary schools,

Experience 2 (video, using the simulation method to demonstrate the assembly of this device at the presentation)

In the development of the previous experiment, to demonstrate Pascal's law, I also assembled a model of a wooden mini-excavator, the basis of which is piston-cylinders filled with water. Interestingly, as pistons that raise and lower the boom and bucket of the excavator, I used medical syringes invented by Blaise Pascal himself in support of his law.

So, the system consists of ordinary medical syringes of 20 ml each (function of control levers) and the same syringes of 5 ml each (function of pistons). I filled these syringes with liquid - water. A system of droppers was used to connect the syringes (provides sealing).

In order for this system to work, we press the lever in one place, the water pressure is transferred to the piston, to the plug, the plug rises - the excavator starts to move, the excavator boom and bucket lower and rise.

This experiment can be demonstrated by answering the question after § 36, p. 87 of A.V. Peryshkin’s textbook for grade 7: “What experience can show the feature of pressure transfer by liquids and gases?”, The experience is also interesting from the point of view of the availability of the materials used And practical application Pascal's law.

Experience 3 (video)

Let's attach a hollow ball (pipette) with many small holes to a tube with a piston (syringe).

Fill the balloon with water and press the piston. The pressure in the tube will increase, water will begin to pour out through all the holes, while the pressure of water in all streams of water will be the same.

The same result can be obtained if smoke is used instead of water.

This experiment is a classic for demonstrating Pascal's law, but the use of materials available to each student makes it especially effective and memorable.

A similar experience is described and commented on in the 7th grade textbook for secondary schools,

Conclusion

In preparation for the competition, I:

studied the theoretical material on my chosen topic;
created homemade devices and conducted experimental verification Pascal's law on the following models: hydraulic press model, excavator model.

conclusions

Pascal's law, discovered in the 17th century, is relevant and widely used in our time in the design of technical devices and mechanisms that facilitate human work.

I hope that the installations I have collected will be of interest to my friends and classmates and will help them better understand the laws of physics.

The action of the press is based on Pascal's law. A hydraulic press consists of two communicating vessels filled with a liquid (usually technical oil) and closed with pistons of various sizes S 1 and S 2 (Fig. 1).

An external force acting on a small piston creates pressure

According to Pascal's law, it is transmitted by the liquid in all directions without change. Therefore, a force acts on the second piston from the side of the liquid

(1)

The hydraulic press gives a gain in force as many times as the area of the larger piston exceeds the area of the small piston.

Force F 1 also changes the potential energy of the liquid in the press. But since the gravity of this fluid is much less than the force F 1. we considered the liquid to be weightless. In this regard, it should be noted that, under real conditions, Eq. (1) is satisfied only approximately.

The press does not give a win in the work. Indeed, when lowering the small piston, the force does work A 1 = F 1 h 1, where h 1 is the stroke of the small piston. Part of the liquid is forced out of the narrow cylinder into the wide one, and the large piston rises h 2 . Work force F 2

(2)

But the liquid is incompressible. Consequently, the volumes of liquids transferred from one cylinder to another are equal, i.e.

Substitute this equation and equation (1) into (2), we get A 1 = A 2 .

The hydraulic press allows the development of colossal forces and is used for pressing products (from metal, plastic, from various powders), for punching holes in metal sheets, for testing materials for strength, for lifting weights, for squeezing oil from seeds at oil mills, for pressing plywood, cardboard, hay. In metallurgical plants, hydraulic presses are used in the manufacture of steel machine shafts, railway wheels, and many other products.

Grade 7 Lesson #41 Date

Subject: Pascal's law. Hydraulic Press.

Lesson type: Lesson learning new material.

Goals and objectives of the lesson:

Educational goal - learn about Pascal's law, expand and deepen students' knowledge on the topic “Pressure”, discuss the difference between solids, liquids and gases; introduce a new concept of "Hydraulic press", help students to comprehend the practical significance, usefulness of the acquired knowledge and skills.

Development goal - create conditions for the development of research and creative skills; communication and collaboration skills.

educational goal - promote the instillation of a culture of mental work, create conditions for increasing interest in the material being studied.

Equipment :

presentation, video clips

personalized cards

During the classes.

1.Org. moment.

Preparing students for class work. Reception "Smile"

2. Motivation and setting goals and objectives of the lesson.

Picture slide show. The objectives of our lesson are:

- Today in the lesson we will study one of the most important laws of nature, Pascal's law. The purpose of our lesson: to study the law, as well as to learn how to explain a number of physical phenomena using Pascal's law. See the application of the law in practice.

To study the physical foundations of the device and the operation of a hydraulic machine;

Give the concept of a hydraulic press and show its practical application.

3. Learning a new topic

All bodies are made up of molecules and atoms. We have considered three different states of aggregation of matter and based on the structure, they are different in properties. Today we have to get acquainted with the influence of pressure on solid, liquid and gaseous substances. Let's look at examples:

Drive a nail into the board with a hammer. What are we seeing? In which direction is the pressure acting?

(Under the pressure of the hammer, the nail enters the board. In the direction of the force. The board and the nail are integral solids.)

Let's take the sand. This is a solid granular substance. Fill the tube with the piston with sand. One end of the tube is covered with a rubber film. We press on the piston and observe.

(Sand presses on the film walls not only in the direction of the force, but also to the sides.)

Now let's see how the liquid behaves. Fill the tube with liquid. We press on the piston, observe and compare with the results of previous experience.

(The film takes the form of a ball, the liquid particles press in different directions equally.)

Let's take gas as an example. Let's inflate the ball.

(Pressure is transmitted by air particles equally in all directions.)

We considered the effect of pressure on solid bulk, liquid and gaseous substances. What similarity do you notice?

Let us explain in more depth the process of pressure transfer by liquids and gases.

Let's do an experiment with Pascal's ball. Let us take a hollow ball, having narrow holes in various places, and attach it to a tube with a piston.

E If you draw water into the tube and press on the piston, then water will flow from all the holes of the ball in the form of streams.(Children make their guesses.)

Let us formulate a general conclusion.

The pressure exerted on a liquid or gas is transmitted without change to every point in the volume of the liquid or gas. This statement is called Pascal's law.

4. Consolidation: answer questions

1. If you shoot from a pneumatic gun at a hard-boiled egg, then the bullet will pierce only a through hole in it, while the rest remains intact. But if you shoot a raw egg, it will shatter. (When fired at a boiled egg, the bullet pierces a solid body, so it pierces in the direction of flight because pressure is transferred in that direction.)

3. An evil genie that is in a gaseous state inside corked bottle, exerts strong pressure on its walls, bottom and cork. How does a genie hit in all directions, if in a gaseous state it has neither arms nor legs? What law allows him to do this? (molecules, Pascal's law)

4. For astronauts, food is made in a semi-liquid form and placed in tubes with elastic walls. What helps astronauts squeeze food out of tubes?

(Pascal's law)

5. Try to explain the process of making glass vessels, when air is blown into a drop of molten glass?

(According to Pascal's law, the pressure inside the gas will be transferred equally in all directions, and liquid glass will inflate like a balloon.)

Application of Pascal's law in practice

Motivation for studying this topic: "Hydraulic press"

Let's answer the question together why is this possible?

He uses a jack. The jack belongs to hydraulic machines.

Mechanisms that work with the help of some kind of liquid are called hydraulic (Greek "gidor" - water, liquid).

Hydraulic Press is a material forming machine driven by a squeezable liquid.

answer the questions.

Are cylinders and pistons the same? What is the difference?

What does it mean: each piston does its own?

What is the principle behind the operation of a hydraulic press?

The device of the hydraulic press is based on Pascal's law. Two communicating vessels are filled with a homogeneous liquid and closed by two pistons, the areas of which are S 1 and S 2 (S 2 > S 1 ). According to Pascal's law, we have equality of pressures in both cylinders: p 1=p2.

p1=F1/S1, P2=F2/ S2 , F1/S1= F2/ S2, F1 S2=F2 S1

During the operation of a hydraulic press, a gain in force is created equal to the ratio of the area of the larger piston to the area of the smaller one.

F 1/ F 2 = S 1/ S 2.

The principle of operation of the hydraulic press.

Millions of cars are equipped with hydraulic brakes. Tens and hundreds of thousands of excavators, bulldozers, cranes, loaders, lifts are equipped with a hydraulic drive.

Video demonstration

5. Checking Understanding : Answer the test questions.

p = F/ S?

A) work

B) strength

B) pressure

A) Joule

B) Pascal
B) Newton

A) 40 mg

B) 0.1 kPa

B) 5 kN

2, in Pa.

A) 1000 Pa

B) 10 Pa

C) 10,000 Pa

D) 100 Pa

A) F \u003d pS

B) F = mg

C) F= kx

A ) F= pS

B ) p = F/S

B) P=pgh

A) reduce less; less

B) reduce; more; more

B) increase more; more

D) increase; less; more

A) reduce more; less

B) reduce; more; more

B) reduce less; less

D) increase; more; more

A) knife blades are sharpened

D) knives are replaced with fishing line

2 . Calculate the pressure of the box.

A) 4800 Pa

B) 135 Pa

C) 13500 Pa

D) 480 Pa

2 .

A) 100 Pa

B) 200 MPa

B) 300 kPa

D) 0.5 Pa

B) at the bottom of the vessel

D) in all directions

A) 4000 Pa

B) 0.4 Pa

C) 0.004 Pa

D) 400 Pa

A) 1300 kg / m 3

B) 500m

C) 1500 Pa

D) 600 J

7. Peer review: exchange notebooks and check

Option 1: 1c, 2b, 3a, 4d, 5d, 6d, 7d, 8a

Option 2: 1b, 2d, 3a, 4a, 5d, 6b, 7d, 8c

6. Summing up. Homework. ξ 44.45 , make a comparative table: "Pressure of solids, liquids and gases"

Answer test questions.

Option 2

What physical quantity is determined by the formulap = F/ S?

A) work

B) strength

B) pressure

Which of the following units is the basic unit for measuring pressure?

A) Joule

B) Pascal
B) Newton

Which of the following values can express pressure?

A) 40 mg

B) 0.1 kPa

B) 5 kN

Express the pressure equal to 0.01 N/cm 2, in Pa.

A) 1000 Pa

B) 10 Pa

C) 10,000 Pa

D) 100 Pa

What formula can be used to calculate the force of pressure?

A) F \u003d pS

B) F = mg

C) F= kx

What formula can be used to calculate pressure?

A ) F= pS

B ) p = F/S

B) P=pgh

List some of the words that are missing. Cutting tools are sharpened in order to ... pressure, because the more ... the area of \u200b\u200bsupport, the ... pressure.

A) reduce less; less

B) reduce; more; more

B) increase more; more

D) increase; less; more

List some of the words that are missing.CThe walls of buildings are installed on a wide foundation in order to ... pressure, since the more ... the area of \u200b\u200bthe support, the ... pressure.

A) reduce more; less

B) reduce; more; more

B) reduce less; less

D) increase; more; more

Find the wrong answer. They try to reduce pressure in the following ways:

A) increase the area of \u200b\u200bthe lower part of the foundation

B) truck tires are made wider

C) the wheels are replaced with caterpillars

D) Reduce the number of columns supporting the platform

Find the wrong answer. They try to increase the pressure in the following ways

A) knife blades are sharpened

B) pliers are replaced with tongs

C) they use a cart in summer, a sleigh in winter

D) knives are replaced with fishing line

A box weighing 0.96 kN has a footprint of 0.2 m 2 . Calculate the pressure of the box.

A) 4800 Pa

B) 135 Pa

C) 13500 Pa

D) 480 Pa

A force of 2 N acts on the needle during sewing. Calculate the pressure exerted by the needle if the area of the point is 0.01 mm 2 .

A) 100 Pa

B) 200 MPa

B) 300 kPa

D) 0.5 Pa

Point out the wrong statement.

A) gas pressure is created by impacts of randomly moving molecules

B) a gas exerts the same pressure in all directions

C) if the mass and temperature of the gas remain unchanged, then with a decrease in the volume of the gas, the pressure increases

D) if the mass and temperature of the gas remain unchanged, then with an increase in the volume of the gas, the pressure does not change

Pascal's Law states that liquids and gases transmit the pressure exerted on them...

A) in the direction of the force

B) at the bottom of the vessel

B) in the direction of the resultant force

D) in all directions

A pressure of 4 kPa corresponds to a pressure of ..

A) 4000 Pa

B) 0.4 Pa

C) 0.004 Pa

D) 400 Pa

Which of the following values can express hydrostatic pressure?

A) 1300 kg / m 3

B) 500m

C) 1500 Pa

D) 600 J